ctor
HOME PAGEtruck
ABOUT SMC tra
CONTACT SMC
| 64Q
LOADER - Quick Attach
|
1100/1200
LOADERS
|
2408
LOADER - Quick Attach
|
| 2409
LOADER - Quick Attach
|
2491
LOADER - Quick Attach
|
92Q
& 94Q LOADER-Quick Attach
|
| 104QX
LOADER-Quick Attach
|
1800QT
LOADER-Quick Attach
|
102QX
LOADER - Quick Attach
|
| 1300/1400
LOADERS |
 |
* 80% of Loader Removed From Tractor When Detached
* Durability for Most Moving and Lifting Jobs * Neutral Charcoal Color * Styling Stripes Matched to Tractor Color * No Loose Parking Stands Required * "Q" Means Quick Attach & Detach SMC's 64Q Quick Attach Loader is computer-designed to match tractors in the 10 to 20 HP range. Its unique design allows for installing most belly-mount mowers along with the loader. It is an efficient design, also. 80% of the loader can be easily removed in less than five minutes, without the use of loose parking stands. Rugged, yet economical, the 64Q is specifically designed and built for your tractor, and your toughest jobs. |
| Oil Lines: Plated steel tubes with 37 degrees
JIC end fittings to help prevent oil leaks.
Cylinders: Double-acting, 1 1/2" diameter with 1" chrome-plated rods are repairable; one seal kit fits all four cylinders. Pivot Points: All pivot points have anti-rotation pins plus all are plated and greaseable. Bucket Level Indicator: Standard. |
Single Handle Valve: Selective regenerative valve
with float detent available for tractors without tractor manufacturers
valve.
Basic Loader: Pre-assembled on protective pallet. Mountings and Valve Kits: Everything needed to complete the installation with easy to follow installation instructions. |
|
Schwartz offers the right loader, with tailor-made mountings to fit a wide range of tractor models, both two and four-wheel drive. Complete ROPS equipped units recommended. |
 |
|
Cylinders: You get smooth, leak-proof action from the micro-finished cylinder tubing a V-pack seals - and dependable, long life from the chrome-plated rods and ruggedly-built cylinders. Bucket Level Indicator: It is standard equipment on your Schwartz loader. Pivot Points: Anti-rotation pins and wide bearing surfaces protect against stress and wear at all major pivot points. All high-stress areas are protected by heavy-gauge steel construction. Grease fittings at major pivot points. |
|
 |
* 80% of Loader Removed From Tractor When Detached
* Durability for Most Moving and Lifting Jobs * Neutral Charcoal Color * Styling Stripes Matched to Tractor Color * No Parking Stands Required * Optional Quick Release Requires No Tools SMC's 2408 Quick Attach Loader is computer-designed to match tractors in the 15 to 35 HP range. Its unique design allows for installing most belly-mount mowers along with the loader. It is an efficient design, also. 80% of the loader can be easily removed in less than five minutes, without the use of loose parking stands. Rugged, dependable, yet economical, the 2408 is specifically designed and built for your tractor, and your tough jobs. |
| Boom: Low profile to match tractor hood line and
improved visibility.
Oil Lines: Plated steel tubes with 37 degrees JIC end fittings to help prevent oil leaks. Cylinders: Double-acting with chrome-plated rods and wear rings are repairable. Seal kits for all four cylinders. Pivot Points: All pivot points greaseable with plated 1 inch anti-rotation pins. |
Single Handle Valve: Selective regenerative valve
with float detent available for tractors without manufacturers valve.
Bucket Level Indicator: Standard. Basic Loader: Pre-assembled on protective pallet. Mountings and Valve Kits: Everything needed to complete the installation with easy to follow installation instructions. |
| * 9' Lift Height
* Low Profile Design Maximizes Operators Visibility * Fits Two and Four Wheel Drive; Cab and Non-Cab Tractors * Entire Loader Except Mounting is Quick Detached From Tractor * No Parking Stands Required to Detach Loader * Bucket Level Indicator is Standard * Neutral Charcoal Color Compliments Tractor The Model 2409 loader is computer engineered and styled with a low profile design then adapted to fit the contour of today's 30-45 P.T.O. horsepower tractors. Low upright members maximize operators visibility. Heavy duty boom crossmember design incorporates superior resistance to twisting and fatigue cracking. The Model 2409, 9' loader will handle those jobs that your tractor in this horsepower range was designed for. |
Oil Lines: Plated steel tubes with 37 degrees JIC end fittings to help prevent oil leaks. Cylinders: Repairable, double-acting with chrome-plated rods and wear rings. Seal kits for all cylinders. Pivot Points: All pivot points greaseable with plated 1 inch anti-rotation pins. Single Handle Valve: Selective regenerative valve with float detent available for most tractors not already equipped with a valve.. Bucket Level Indicator: Standard. Basic Loader: Pre-assembled on protective pallet. Mountings, Hose and Valve Kits: Everything needed to complete the installation with easy to follow installation instructions. |
 |
* 9' or 10' Lift Height Capabilities
* Low Profile Design Maximizes Operators Visibility * Fits Two and Four Wheel Drive; Cab and Non-Cab Tractors * Entire Loader Except Mounting is Quick Detached From Tractor * No Parking Stands Required to Detach Loader * Bucket Level Indicator is Standard * Optional Hydraulic Self Leveling of Attachment in Raise Cycle. * Neutral Charcoal Color Compliments Tractor This loader has been computer engineered and styled with a low profile design then adapted to fit the contour of today's 35-55 P.T.O. horsepower tractors. Low 2491 upright members maximize operators visibility. Heavy duty boom crossmember design incorporates superior resistance to twisting and fatigue cracking. The Model 2491, 9'/10' loader will handle those jobs that your tractor in this horsepower range was designed for. |
| * 80% of Loader Removed From Tractor When Detached
* Durability for Most Moving and Lifting Jobs * Neutral Charcoal Color * Styling Stripes Matched to Tractor Color * No Loose Parking Stands Required * "Q" Means Quick Attach & Detach SMC's 92Q Quick Attach Loader has been designed to match the utility, chore, midrange 35 to 75 horsepower tractor. The 92Q with its wraparound side frame and heavy duty boom design will handle the tough jobs. Yet it is "Quick Attach", 80% of the loader can be removed in less than five minutes without the use of loose parking stands. This feature does make your mid-range horsepower tractor truly a utility unit - it becomes more than just a loader tractor. |
 |
 |
Cylinders: Double-acting cylinders with micro-finished tubing and chrome-plated rods are repairable; seal kits for all four cylinders. Pivot Points: 1.25" plated anti-rotation pins at all pivot points and greaseable. Single Handle Valve: Optional, requires one remote valve spool on tractor. Bucket Level Indicator: Standard. Basic Loader: Pre-assembled. * The 72" H.D. and 84" Material buckets are not recommended for the 94Q Loader. |
| * 80% of Loader Removed From Tractor When Detached
* Durability for Most Moving and Lifting Jobs * Neutral Charcoal Color * Styling Stripes Matched to Tractor Color * No Loose Parking Stands Required * "Q" Means Quick Attach & Detach This is the big, rugged SMC loader that was computer-designed to work most efficiently on your 35 to 94 HP front wheel assist tractor. Boom design features new-style crossmember, tapered boom arm and knee plates which incorporate pivot points for base of lift and bucket cylinders. In just minutes you can detach 80% of loader from tractor, with tractor hydraulics doing the work. The SMC 104QX Loader handles those tough jobs with ease - and asks for more. |
Cylinders: Double-acting cylinders with chrome-plated rods are repairable; seal kits are available for all four cylinders. Pivot Points: For smooth action and longer life, all pivot points have increased bearing surfaces, 1.25" dia. anti-rotation pins, plus all are plated and greaseable. Single Handle Valve: Optional, requires one remote valve spool on tractor. Bucket Level Indicator: Standard. Basic Loader: Pre-assembled on timber skids. |
|
The 1800QT has quality features such as dual guide cones on each side of the frame for positive, 360 degree holding. Wide, 3" tapered boom arms. There are anti-rotation pins at all pivot points, 2 1/2" boom end castings and many other features you'll appreciate. The 1800QT has breakaway capacity of 5400 lbs. and lift capacity of 2900 lbs. to the full lift height of 10'5". The 40" reach at maximum lift height enables dumping into trucks with sides. Mounting brackets are available for over 100 tractors. Seven attachment options equip the 1800QT for a wide range of material handling jobs. |
 |
 |
* 80% of Loader Removed From Tractor When Detached
* Durability for Most Moving and Lifting Jobs * Neutral Charcoal Color * Styling Stripes Matched to Tractor Color * No Loose Parking Stands Required * "Q" Means Quick Attach & Detach This is the big, rugged SMC loader that was computer-designed to work most efficiently on your 60 to 100 HP tractor. Boom design features new-style crossmember, tapered boom arms and knee plates which incorporate pivot points for base of lift and bucket cylinders. In just minutes you can detach 80% of loader from tractor, with tractor hydraulics doing the work. The SMC 102QX Loader handles those tough jobs with ease - and comes back for more. |
|
Cylinders: Double-acting, 2.25" bore lift cylinders and 2.75" bore bucket cylinders with chrome-plated rods are repairable; seal kits for all four cylinders. Pivot Points: For smooth action and longer life, all pivot points have increased bearing surfaces, 1.25" dia. anti-rotation pins, plus all are plated and greaseable. Single Handle Valve: Optional, may require one remote valve spool on tractor. Bucket Level Indicator: Standard. Basic Loader: Pre-assembled |
* 60" Material Bucket * 60" H.D. Material Bucket * 72" Material Bucket * 72" H.D. Material Bucket * 84" H.D. Material Bucket * 84" Material and Snow Bucket * Grapple Fork * Bale Spear * Universal Quick Attach Adapter |
|
Mount these work-a-holics to most tractor models without chassis modification. The box-frame construction, lubricated hinge pins and custom-built lift cylinders add up to extra years of dependable use. You can break away over 3700 pounds, and lift a ton or more 8 1/2 feet. To match your materials lifting, loading and moving chores, there's a variety of rugged attachments - snow, manure, grapple forks plus material buckets in widths from 58 to 84 inches. The 1300 Loader is ideal for utility tractors of 30 to 75 HP. The 1400 fits row crop tractors of 40 to 75 HP. One is sure to be just right for your chores. |
Cylinders: You get smooth, leak-proof action from the micro-finished cylinder tubing a V-pack seals - and dependable, long life from the chrome-plated rods and ruggedly-built cylinders. Pivot Points: Wide bearing surfaces protect against stress and wear at all major pivot points with anti-rotation pins. All high stress areas are protected by heavy gauge steel construction. Grease fittings at all pivot points. |
